The most frequent cause of this error is corrupted Vanguard files. However, it can also occur if Vanguard services are disabled in Windows or when certain registry settings are incorrectly configured.

Now that you understand what causes this problem, let me show you how to resolve it.

1. Enable Vanguard Services

If the Riot Vanguard service is disabled or not running as expected, the Riot Client cannot launch the game. Ensuring the service is enabled and set to start automatically allows Vanguard to load with Windows, which prevents the dependency error.

1. Press Windows + R, type services.msc, and press Enter.
2. Scroll down and locate vgc in the list of services.
3. Right-click it and select Properties.
4. From the Startup type menu, select Automatic.
5. Click Start under the Service status section.
6. Press Apply, then OK to confirm.
7. Restart your PC so Vanguard loads automatically in the background.

2. Edit Registry

The DevOverrideEnable registry entry can sometimes interfere with Vanguard. This value controls whether Windows allows certain driver overrides, which can conflict with Vanguard’s initialization. When its value is set to 1, it may stop Vanguard from starting. Resetting the value back to 0 restores default behavior and ensures the service can run correctly.

Warning: Be careful when editing the registry. Changing unrelated values may cause system instability. Consider backing up your registry first.

1. Press Windows + R, type regedit, and press Enter.
2. In the Registry Editor, go to:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Policy

3. On the right side, locate DevOverrideEnable.
4. Double-click it and set the Value data to 0.
5. Click OK and close the editor.
6. Restart your PC to apply the changes.

3. Reinstall Vanguard Via Command Prompt

If Vanguard is corrupted or only partially installed, Valorant will fail to launch. Uninstalling Vanguard through Command Prompt and then letting the Riot Client reinstall it ensures a fresh installation, which usually resolves the dependency error.

Warning: Do not delete other services by mistake. Only run the commands listed for Vanguard. If you don’t run Command Prompt as Administrator, the commands will fail.

1. Search for Command Prompt in the Windows search bar and run it as Administrator.
2. Enter the following commands one by one to stop Vanguard services:

   sc stop vgc
   
   sc stop vgk

3. Remove Vanguard by running these commands:

   sc delete vgc sc delete vgk

   

4. Restart your PC to complete the removal.
5. Open the Riot Client. It will automatically reinstall Vanguard.
6. Restart your PC again to ensure Vanguard runs properly in the background.

If none of these methods work, reinstalling the Riot Client entirely or contacting Riot Support is recommended.

The post Fix: Valorant “We Couldn’t Install a Required Dependency” Error appeared first on Appuals.

Rendering conflicts can also contribute to instability. The default DirectX renderer may fail to work smoothly with certain GPU-driver combinations, especially under heavy load, which can cause crashes during game-play. On top of that, Windows full-screen optimizations often interfere with the way Crusader Kings 3 handles frame presentation, creating additional display-related problems. In some cases, third-party antivirus software may further disrupt the game by flagging essential files as suspicious, interrupting runtime operations and leading to unexpected shutdowns.

1. Increase Virtual Memory (Paging File)

Expanding the virtual memory is one of the most effective solutions when crashes are linked to limited RAM. Virtual memory allows Windows to use a portion of your storage drive as temporary memory, giving the game additional resources and improving stability.

1. Press Win + S, type Advanced system settings, and press Enter.

   

2. Go to the Advanced tab and click Settings under the Performance section.

   

3. In the new window, select the Advanced tab and click Change under Virtual Memory.

   

4. Uncheck Automatically manage paging file size for all drives.
5. Select your system drive (usually C:), then choose Custom size.
6. Enter the Initial size (MB) and Maximum size (MB) based on your system’s RAM:

   Initial size: 1.5 × RAM (example: 16 GB RAM → 24576 MB)
   Maximum size: 3 × RAM (example: 16 GB RAM → 49152 MB)

7. Click Set, then OK to apply the changes.

   

8. Restart your PC and test the game again.

2. Switch Graphics Renderer to Vulkan

The Vulkan API is often more efficient and compatible with modern hardware than DirectX. Switching to Vulkan can reduce crashes, improve rendering stability, and lower driver overhead.

1. Open Steam and go to your Library.
2. Right-click on Crusader Kings 3 and select Properties.

   

3. In the General tab, find the Launch Options field.
4. Type the following command:

   -vulkan

   

5. Close the Properties window and launch the game to check if the crashes stop.

3. Disable Full-screen Optimizations

Windows full-screen optimizations can sometimes interfere with game performance, causing instability or crashes. Disabling this feature forces the game to run in a more stable exclusive full-screen mode.

1. Go to the Crusader Kings 3 installation folder.

   Default Steam Path:
   C:\Program Files (x86)\Steam\steamapps\common\Crusader Kings III

2. Find CrusaderKingsIII.exe, right-click it, and select Properties.

   

3. Open the Compatibility tab.
4. Check the box for Disable fullscreen optimizations.
5. Click Apply, then OK.

   

6. Restart your PC and launch the game again.

4. Add CK3 to Antivirus Exceptions

Some antivirus programs mistakenly flag games as suspicious, blocking their files and processes. Adding Crusader Kings 3 to antivirus exceptions ensures the antivirus does not interfere with the game.

1. Open your antivirus or security application.
2. Go to the section labeled Exclusions, Exceptions, or Allowed Apps.

   

3. Select the option to Add a Folder or Add an Exception.

   

4. Browse to the Crusader Kings 3 installation folder.

   Default Steam Path:
   C:\Program Files (x86)\Steam\steamapps\common\Crusader Kings III

5. Select the folder and confirm to add it as an exception.

   

6. Restart your PC.
7. Launch Crusader Kings 3 and verify if the problem is resolved.

If none of these solutions work, try verifying the integrity of the game files through Steam. This will replace any missing or corrupted files in the installation directory. As a last resort, reinstalling the game can eliminate persistent crashes by providing a completely fresh setup.

The post How to Fix Crusader Kings 3 Crashing on Windows? appeared first on Appuals.

In most cases, the error is triggered because the Vanguard service is not running in the background. However, it may also be caused by corrupted files, damaged registry entries, or incomplete updates. Since Vanguard is a mandatory security layer, even minor service disruptions can completely prevent the game from running.

With the causes now clear, let’s walk through the solutions step by step.

1. Restart Riot Client & PC

A simple restart is often enough to fix this error. Restarting both the Riot Client and your PC forces Vanguard (VGC) to reload, clears temporary conflicts, and restores proper communication between the service and the game.

2. Enable & Start the VGC (Vanguard) Service

The VGC service is a critical background process for Vanguard. It verifies game integrity, enforces security checks, and connects your system to Riot servers. If this service is disabled or stopped, Vanguard cannot function, which leads to the VAN 57 error.

1. Press Windows + R, type services.msc, and press Enter.

   

2. Scroll down and locate vgc in the list of services.
3. Right-click on it and select Properties.

   

4. In the Startup type menu, choose Automatic.
5. Click the Start button under the Service status section.
6. Press Apply, then OK to confirm.

   

7. Restart your PC so Vanguard launches automatically in the background.
8. Open League of Legends again to check if the VAN 57 error is resolved.

3. Regedit “DevOverrideEnable” Fix (Advanced)

The Windows registry entry DevOverrideEnable can also interfere with Riot Vanguard. If its value is set to 1, it allows overrides that may stop Vanguard from starting. Changing it back to 0 ensures Vanguard initializes properly without interruptions.

1. Press Windows + R, type regedit, and press Enter.

   

2. In the Registry Editor, navigate to:

   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CI\Policy

3. On the right side, find the entry DevOverrideEnable.
4. Double-click it and change the Value data to 0.
5. Click OK and close the editor.

   

6. Restart your PC to apply the changes.
7. Try launching League of Legends again.

4. Clean Uninstall & Reinstall Vanguard

If the error persists, Riot Vanguard itself may be corrupted. Performing a clean reinstall removes broken files, resets settings, and ensures the anti-cheat system reinstalls correctly from the Riot Client.

1. Press Windows + R, type appwiz.cpl, and click OK.

   

2. Right-click Riot Vanguard and select Uninstall.

   

3. Visit the official Riot Games website and download any Riot game such as Valorant or League of Legends.
4. During installation, Riot Vanguard will be reinstalled automatically.

   

5. After installation, restart your PC.
6. Launch League of Legends to confirm if the VAN 57 error has been fixed.

The post How to Fix Vanguard Error VAN 57 in League of Legends appeared first on Appuals.

The Battlefield 6 anti-cheat system treats these tools as potential cheating methods. To maintain fair gameplay, it blocks such software and displays this error whenever you try to launch the game.

Now that you know why this error occurs, let’s move on to the solutions.

1. Disable Third-Party Controller Emulators

Disabling third-party controller emulation programs prevents duplicate controller signals and ensures the game only recognizes trusted devices.

1. Right-click the emulator’s icon from the system tray > Select Exit.
   
2. Press Ctrl + Shift + ESC to open Task Manager.
3. End all tasks related to DS4Windows or similar software.
   
4. Restart Battlefield 6 and check if the error is resolved.

2. Configure Controller Through Steam Input

Instead of relying on third-party software, configure your controller directly through Steam. Steam Input is trusted by most games and avoids conflict with Battlefield 6’s anti-cheat.

1. Open Steam and go to Settings.
   
2. Click the Controller tab.
   
3. Enable PlayStation Controller Support or Enable Steam Input for Xbox Controllers depending on your device.
   
4. Connect your controller via USB cable or Bluetooth.
5. Launch Battlefield 6 through Steam.
6. Right-click on Battlefield 6 in your Steam Library > Properties.
   
7. Go to Controller > Enable Steam Input.
   

3. Use x360ce as a Last-Resort Workaround

If none of the above solutions work, you may try x360ce. This tool remaps your controller into the Xbox XInput format, which Battlefield 6 usually accepts. However, keep in mind that it is still an emulator and may carry the same risks of detection as other tools. Use this only as a fallback option.

1. Download x360ce on your computer.
   
2. Extract the downloaded zip file.
   
3. Run x360ce.exe as Administrator.
   
4. Install any required components when prompted.
   
5. Reopen x360ce.exe as Administrator.
6. Select Controller 1 and click Add.
   
7. Select your connected controller and click Add Selected Device.
   
8. Click Remap All to align your buttons with Xbox inputs.
   
9. Once finished, click Save All.
   

NOTE: In the latest versions of x360ce, you usually don’t need to place the executable in the Battlefield 6 folder. If your controller still doesn’t work, try adding x360ce.exe into the game’s installation directory as a final step.

The post How to Fix Battlefield 6 Virtual Controller Error Message? appeared first on Appuals.

The game may mistakenly treat it as an attempt to bypass disc checks, resulting in the error. Even if you are not using Daemon Tools directly, its background services may still be active and trigger the message.

Now that you understand the cause of the error, let’s go through the fixes.

1. Close Daemon Tools from Task Manager

1. Right-click the Daemon Tools icon in the system tray > select Exit.
2. Press Ctrl + Shift + ESC to open Task Manager.
3. Locate and End task for all Daemon Tools processes still running in the background.
   
4. Once all related services are closed, relaunch the game and check if the error is resolved. 

2. Disable Daemon Tools from Device Manager

If closing the program did not help, disabling or uninstalling the Daemon Tools drivers from Device Manager can resolve the error. This method also removes hidden drivers, such as sptd.sys, that may be flagged by the anti-cheat system.

1. Right-click the Start button on the taskbar > select Device Manager.
2. Expand Storage controllers and disable/uninstall any drivers related to Daemon Tools.
   
3. Expand Universal Serial Bus controllers and again disable/uninstall any Daemon Tools drivers found there.
   
4. Restart your PC and then launch the game.

3. Uninstall Daemon Tools

1. Press Win + R > type appwiz.cpl and press Enter.
2. In the Programs and Features window, locate Daemon Tools, right-click it, and select Uninstall/Change.
   
3. After the uninstallation is complete, restart your PC and launch Battlefield 6 to confirm if the error is gone.

The post How to Fix Daemon Tools Conflict in Battlefield 6 appeared first on Appuals.

This detection leads to launch errors in games like Rust because anti-cheat systems do not allow drivers capable of low-level input modification to run in the background. Additionally, cheating tools can exploit Interception.exe for macros, automated inputs, or recoil scripts, making it incompatible with games that enforce strict anti-cheat measures.

If you’re encountering this error, the most effective solution is to completely uninstall the Interception driver.

Before You Begin

A few important notes before proceeding:

• Backup any important configurations: If you use macros or custom key-mapping tools that rely on Interception.exe, they will stop working after removal.
• Administrator rights are required: These steps involve system-level changes, so ensure you’re using an account with admin privileges.
• Prepare for a restart: Changes will only take effect after rebooting your system.

How to Completely Uninstall Interception.exe Using the GitHub Script

The Interception driver integrates deeply into Windows and cannot be removed by simply deleting its files. To ensure a full removal, including registry entries, use the official GitHub uninstallation script:

1. Go to the official Interception GitHub repository and download the ZIP file.
2. Right-click the downloaded ZIP file, select Extract All, and choose a location to extract the contents.
3. Navigate to the extracted folder, open the subfolder named command line installer, and copy its full path.
4. Press Windows + S, type cmd, right-click on Command Prompt, and select Run as administrator.
5. In Command Prompt, type these commands one by one:

   cd "C:\Users\YourName\Desktop\Interception\command line installer" install-interception /uninstall

6. Once the uninstallation is complete, restart your computer to apply the changes.

This process completely removes Interception.exe from your system, eliminating its entries from Windows and preventing anti-cheat programs from detecting it.

If That Doesn’t Work: Disable Run as Administrator for Rust

Some users have reported that Rust fails to launch when its executables run with elevated privileges while anti-cheat systems are active. Running as administrator increases access permissions, which can cause anti-cheat systems to treat the program as suspicious.

1. Open Steam and navigate to your Library.
2. Right-click on Rust and choose Manage > Browse local files.
3. Locate these two files:

   RustClient.exe Rust.exe

4. Right-click each file, one at a time, and select Properties.
5. Go to the Compatibility tab and uncheck Run this program as an administrator.
6. Click Apply, then OK to save the changes.
7. Close Steam, then relaunch it and try starting Rust again.

If the error still persists after uninstalling Interception.exe and adjusting permissions, the problem may be due to corrupted or mismatched game files. In that case, performing a clean reinstall of Rust is the final step.

The post How to Fix Rust Launch Errors Caused by Interception.exe appeared first on Appuals.

Before You Begin

Perform these quick checks before diving into advanced fixes:

• Restart your PC and router to refresh all network connections.
• Check Fortnite server status on the official Epic Games status page to rule out outages.
• Ensure a stable internet connection using tools like Speedtest. Look for high latency or frequent drops.
• Update Fortnite & Epic Games Launcher to their latest versions.

If the problem continues after these steps, proceed with the fixes below.

1. Reset Network Configuration & Clear DNS

Resetting your network settings clears outdated or corrupted DNS entries that may prevent Fortnite from connecting to matchmaking servers. This process restores your network configuration to its default state, providing a fresh and stable connection path.

1. Press Windows + S, type “cmd”, right-click it, and select Run as administrator.
2. In the Command Prompt, type:

   netsh winsock reset

   

3. Press Enter and wait for confirmation.
4. Then type:

   netsh int ip reset

   

5. Next, type:

   ipconfig /flushdns

   

6. Press Enter to clear the DNS cache.
7. Type these commands one by one:

   ipconfig /release
   
   ipconfig /renew

   

8. Restart your computer to apply all changes.

2. Use Google DNS for Better Connectivity

Using Google DNS can improve server resolution and reduce connection timeouts or mismatches.

1. Press Windows + R, type “ncpa.cpl”, and press Enter.
2. Right-click your active network connection and select Properties.
3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
4. Enable Use the following DNS server addresses and set:

   Preferred DNS: 8.8.8.8 Alternate DNS: 8.8.4.4

5. Click OK and restart Fortnite.

3. Adjust Fortnite Matchmaking Region

A mismatch between your client’s region and the Epic Games server can also trigger this error. To fix it, select a region closest to you.

1. Open Fortnite → Settings.
2. Navigate to the Game tab.
3. Set Matchmaking Region to the closest server to your location.
4. Click Apply and restart the game.

4. Verify Fortnite Game Files

Corrupted or missing files can break matchmaking. Verifying ensures your installation matches Epic’s latest version.

1. Open the Epic Games Launcher → Library.
2. Find Fortnite, click the three dots, and select Manage.
3. Click Verify under Verify Files.
4. Wait for the scan to finish, then restart Fortnite.

5. Check Firewall & Antivirus Settings

Your firewall or antivirus may be blocking Fortnite or Epic Games Launcher. Ensure they are on the allowed list:

1. Open Windows Security → Firewall & network protection → Allow an app through firewall.
2. Ensure both Fortnite and Epic Games Launcher are allowed for Private and Public networks.

If all else fails, reinstall Fortnite to replace deeply corrupted files with a clean installation.

If the issue persists even after these steps, it may be account-specific or tied to ongoing server issues. In that case, contact Epic Games Support for further assistance.

The post Fix: “Unsupported Match Options Provided” Error in Fortnite appeared first on Appuals.

These problems can prevent the game from starting up correctly, resulting in a looped or frozen loading screen. Fortunately, there are several proven solutions that can help you rebuild necessary files, restore missing features, and repair any corrupted data, allowing the game to load normally.

Before You Begin

• Close unnecessary apps: Background applications can interfere with the game’s resources.
• Run the game as an administrator: Right-click the launcher or executable and select Run as administrator.
• Update Windows: Ensure your system has the latest updates installed.

1. Launch Umamusume Directly from the Installation Folder

Launching the game from its installation directory ensures it uses the correct files and resources, bypassing issues caused by corrupted shortcuts, misconfigured launchers, or third-party overlays like the Steam overlay.

If the game runs this way, it indicates that the issue lies in your shortcut or launcher setup.

1. Make sure Umamusume Pretty Derby and related launchers are fully closed.
2. Press Windows + E to open File Explorer.
3. Navigate to the installation folder. By default:

   C:\Program Files (x86)\DMM\Umamusume

4. Locate the game’s executable (usually umamusume.exe).
5. Right-click it and select Run as administrator.
6. If it launches successfully, recreate a clean desktop shortcut by right-clicking the executable and selecting Send to → Desktop (create shortcut).

2. Rename the Umamusume Configuration Folder

The “Umamusume” folder contains configuration files, cached resources, and temporary data that the game uses to launch quickly and apply personal settings. Corruption in these files can cause an infinite loading screen.

By renaming this folder, you force the game to create a fresh set of default configurations on the next launch.

Warning: Game progress is stored on the server, but local preferences (graphics settings, keybindings) may reset. Always keep a backup before renaming or deleting this folder.

1. Press Windows + E to open File Explorer.
2. Navigate to the folder where Umamusume is installed. By default:

   C:\Program Files (x86)\DMM\Umamusume

3. Right-click the folder named Umamusume, select Rename, and change the name (e.g., Umamusume_Backup).
4. Launch the game again. A new folder will be created automatically.

To restore: If this does not work, delete the new folder and rename your backup back to Umamusume.

3. Install Windows Media Feature Pack (For Windows N Editions)

The Media Feature Pack provides essential video and audio components required for games like Umamusume to run. Without it, the game may fail to initialize or freeze at startup.

Warning: Installing optional features requires a system restart. Save your work before proceeding.

1. Press Windows + I to open Settings.
2. Go to System > Optional features.
3. Click View features.
4. Search for Media Feature Pack, select it, click Next, then click Add.
5. Restart your PC after installation.

4. Repair or Verify Game Files

If files are missing or corrupted, repairing the game can restore them to their original state. This prevents loading errors caused by incomplete or damaged files.

Warning: This process may take several minutes and use significant bandwidth if large files need redownloading.
For DMM Launcher:

1. Launch Umamusume from the DMM client.
2. Click the menu icon at the bottom right.
3. Select Repair Data.
4. Wait for the repair to finish, then relaunch the game.

For Steam Users:

1. Open Steam and go to your Library.
2. Right-click Umamusume → Properties → Installed Files.
3. Click Verify Integrity of Game Files.
   

If none of the above solutions resolve the issue:

• Contact DMM Support: Visit the official support page and provide details about your system and issue.
• Reinstall on a different drive: If you have another storage drive, a clean install there may resolve stubborn issues.

The post Fix: Umamusume Pretty Derby Stuck on Loading Screen appeared first on Appuals.

Before you start troubleshooting, check the game’s server status. If the servers are undergoing maintenance or experiencing downtime, these fixes will not work. Once you confirm the servers are operational, follow the steps below to resolve the login error.

Before You Begin

Perform these quick checks first, as they often resolve temporary login issues:

• Restart your router and PC to clear temporary network glitches.
• Run Steam as Administrator to avoid permission conflicts.
• Flush your DNS cache by opening Command Prompt and typing: ipconfig /flushdns.
• Check your firewall or antivirus and temporarily disable them to see if they’re blocking Fragpunk. (Re-enable them after testing.)

1. Disable Advanced Security Features (For Eero Routers Only)

If you use an Eero router (or any router with similar advanced security features), these settings may block the game’s authentication traffic. Features like malicious site filters, threat detection systems, and auto-blockers can prevent Fragpunk from establishing a stable connection. Temporarily disabling these features can help determine whether they’re causing the login issue.

Warning: Disabling these features may lower your network’s security and expose devices to potential threats. Only proceed if you understand the risks, and re-enable these features once troubleshooting is complete.

2. Use a VPN (For Region-Based Restrictions)

If the error is related to region-based restrictions or ISP-level blocks, using a VPN (Virtual Private Network) can help by routing your connection through another location, making it seem like you’re accessing the game from a different region.

1. Choose a trusted VPN such as NordVPN, ExpressVPN, or ProtonVPN, and download the application.
2. Launch the VPN and connect to a server in a stable region (e.g., USA or Europe).
3. Try logging into Fragpunk. If successful, you may disconnect the VPN after authentication to reduce latency.

3. Whitelist Fragpunk in Firewall & Antivirus

Sometimes, Windows Firewall or third-party antivirus software can block Fragpunk from accessing the internet. Adding the game as an exception can help.

1. Open Windows Security → Firewall & Network Protection.
   
2. Click Allow an app through firewall.
   
3. Add Fragpunk.exe and allow it for both Private and Public networks.
4. If using antivirus software, add the game’s installation folder to its exclusion list.

4. Verify and Repair Game Files

Corrupted or missing game files can cause login failures. Steam allows you to verify and replace these files with official versions.

1. Open Steam and go to your Library.
2. Right-click on Fragpunk and select Properties.
3. Go to the Installed Files tab and click Verify Integrity of Game Files.
4. Once complete, restart Steam and launch the game again.

5. Update Network Drivers

Outdated or corrupted network drivers can cause connectivity issues. Updating them improves network stability and connection speed.

1. Right-click the Start icon and select Device Manager.
2. Expand the Network adapters section.
3. Right-click your active network adapter and choose Update driver.
4. Click Search automatically for drivers.
5. Allow Windows to install the latest drivers, then restart your PC.

If none of the above steps work, reinstalling the game can eliminate deeply corrupted files or misconfigurations that prevent successful login. Make sure to back up any personal data (e.g., screenshots or configuration files) before uninstalling.

The post How to Fix “Login Timed Out” Error in Fragpunk? appeared first on Appuals.

In some cases, the problem arises because FragPunk struggles to initialize under DirectX 12, suggesting that API compatibility could be a factor. Below are the most common causes of this issue and their solutions.

1. Enable AVX2 Support in BIOS

AVX (Advanced Vector Extensions) allows your CPU to process complex tasks faster, such as game computations, AI, and rendering. Many modern games require this feature for proper operation.

1. Restart your computer. As it restarts, press the BIOS key repeatedly. This is usually one of the following: Delete, Esc, F2, F10, or F12.
2. Open a tab labeled Advanced, Tweaker, or CPU Configuration.
3. Look for options such as AVX, AVX2, or Advanced Vector Extensions. Some BIOS versions may list this under Intel Virtualization, CPU Features, or Power/Performance Settings.
4. Set all AVX-related options to Enabled.
5. Press the key shown for Save and Exit.
6. Allow your system to reboot and then try launching FragPunk again.

2. Run as Administrator

Running the game as administrator grants it the necessary permissions to access protected system files. Without these privileges, FragPunk may fail to start.

1. Go to the folder where FragPunk is installed.
2. Find the game’s .exe file, right-click it, and select Run as administrator.

3. Update Graphics Driver

If your GPU driver is outdated, it may lack support for new rendering features like DirectX 12 or Vulkan. Updating ensures compatibility and prevents crashes or launch errors.

1. Right-click the Start icon and select Device Manager.
2. Expand Display adapters.
3. Right-click your graphics card and select Update driver.
4. Click Search automatically for drivers.
5. Follow the on-screen instructions to install the driver.
6. Restart your PC and try launching FragPunk again.

4. Launch the Game with DX11

FragPunk may fail to start with DirectX 12 or Vulkan on certain systems. Switching to DirectX 11 can improve stability and prevent crashes.

1. Open Steam and go to your Library.
2. Right-click FragPunk and select Properties.
3. Under the General tab, find Launch Options and type:

   -dx11

   

4. Close the window and try launching the game again.

5. Update Motherboard BIOS (For Advanced Users Only)

\If you are using a newer CPU (like Intel’s 13th or 14th-gen) with an outdated BIOS, features like AVX2 may not work properly. Updating the BIOS ensures full CPU compatibility.

To do this, visit your motherboard manufacturer’s official website, download the latest BIOS version for your model, and follow their instructions to update via a USB drive.

The post FragPunk Won’t Start? Here’s How to Fix It appeared first on Appuals.